Dev:cc3200

TI Chip with Arm Cortex M4 and network processor with ipV4 in hardware.

Code Composer studio on Linux

• TI CCS v6 wiki

• During install complains about libudev.so.0 missing. Then do:

sudo ln -s /lib/i386-linux-gnu/libudev.so.1 /lib/libudev.so.0

Notes for Linux

Serial connection

Enable recognition for the serial USB connection, which is a FTDI chip with TI codes:

sudo su
modprobe ftdi-sio
echo 0451 c32a > /sys/bus/usb-serial/drivers/ftdi_sio/new_id

Alternative: use this udev rule:

ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0660", GROUP="dialout", RUN+="/sbin/modprobe ftdi-sio", RUN+="/bin/sh -c '/bin/echo 0451 c32a > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"

Tools

Install arm tools. May have to remove gdb first.

sudo apt-get remove gdb
sudo apt-get install binutils-arm-none-eabi gdb-arm-none-eabi gcc-arm-none-eabi libnewlib-arm-none-eabi
sudo apt-get install openocd

Resources

From TI

• cc31xx & cc32xx wiki
• cc3200 LaunchPad

Other sources:

• Using the CC3200 Launchpad Under Linux